PEG2
Metal Cleaning Compound
PEG2
PEG2 is an industrial strength terpene based cleaner formulated
to replace petroleum and chlorinated cleaning solvents - PEG2
will remove oils, soot and other residues from metal surfaces.
Advantages:
-
Cleaning Power Removes Heavy Grime
. Removes Fats, Oils, Carbon, Soot and Dirt
. Will Not Leave a Residue
-
Saves Money
. Used Over & Over in a Cleaning Tank
. Does Not Require Distillation to Remove Contaminants
. Does Not Require High Cost Waste Removal
-
Easy to Use
. Does Not Irritate Skin
. No Objectionable or Toxic Fumes
. Fresh Pine Scent
-
Non-Corrosive
. Will Not Harm Metal Surfaces
. Will Not Scratch Metal Surfaces
-
Environmentally Friendly
. Biodegradable
. Non-Toxic / Non-Hazardous
. Chlorine Free
. Free of Petroleum Distillates
. Does Not Effect the Ozone
PEG2
Cleaning & Disposal
PEG2 is formulated to replace petroleum and chlorinated
solvents.
PEG2 will remove:
-
-
-
-
-
Waxes (machining & other types)
-
-
-
-
Paints & Coatings (uncured)
-
-
Tars, Mastics, and Adhesives
Cleaning
PEG2 is a direct replacement for petroleum and chlorinated solvents.
PEG2 is used as a rinsable spray, dip*, brush, or wipe solvent.
PEG2 Recommended Dilutions:
-
Heavy Soils - one part PEG2 : one part water
-
Mild Soils - one part PEG2 : five parts water
-
Light Soils - (for cleaning walls, floors,
cabinets, etc.)
one part PEG2 : ten parts water
* PEG2 does not combine with petroleum or vegetable based
oils, consequently when used as a dip solvent residue will
float to the top of the PEG2 where it is skimmed off. The
remaining PEG2 is then ready to use again.
For Best Results
The most effective and economical method to use PEG2 is as a
dip solvent. This will allow for the solvent to be reused several
times, saving money in both product costs and disposal costs.
It is recommended PEG2 is heated before cleaning.
** PEG2 works best when heated to 110oF.
Disposal
Dispose of PEG2 rags in approved waste containers.
Incompatibilities
PEG2 is not recommended for use on latex, buna N, neoprene,
polystyrene, and some plastics.
|
|
Grignard Company LLC
126 Passaic Street
Newark, New Jersey 07104
PH 973-412-8900
FX 973-412-8906
|
