PEG 2
Application: Wire Rope Socketing
PEG2
PEG2 is a turpene based industrial strength cleaner formulated
to replace petroleum distillates and chlorinated cleaning solvents!
PEG2 will remove asphalt, petrolatum, PreLube 19, and other materials
from wire rope prior to socketing.
Socketing Procedure:
-
Dilute PEG2 with water at a 1:1 ratio
-
Heat PEG2 solution between 100oF -
110oF (if
possible)
-
Bath Agitation: Moderate (if applicable)
-
Submerse wire rope broom in PEG2 bath
1. Lubricants
will float to surface
2. Remove lubricants with industrial
skimmer or cheese cloth
3. Dispose of waste material properly
-
Remove wire rope, rinse with water then dry
with stream of air
Note: PEG2 contains rust inhibitors to prevent corrosion of
unprotected wires
Advantages over Chlorinated Solvents
1. Saves money by reducing waste removal expenses
-
PEG2 does not combine with contaminants, therefore
your company only pays to have the waste (petrolatum and asphalt)
removed after they are skimmed off
-
PEG2 is biodegradable, no hazardous waste removal
costs associated with the product
2. Save money by requiring less material for cleaning
-
PEG2 is water soluble and may be diluted, greatly
reducing
its overall cost
-
PEG2 does not combine with contaminants, therefore
PEG2 may be used over and over
3. User Friendly, Environmentally Safe
-
Non-Toxic, Non-Corrosive, No ODS's
-
-
-
No Objectionable or Toxic Fumes (pine scent)
-
Chlorine & Petroleum Distillate Free
4. PEG2 may be used as a multipurpose cleaner
-
Dilute with water, 4:1 to clean machinery, vehicles,
other mild applications
-
Dilute with water, 10:1 for cleaning
floors
and walls
|
|
Grignard Company LLC
126 Passaic Street
Newark, New Jersey 07104
PH 973-412-8900
FX 973-412-8906
|
